ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Embrittlement conditions of ferritic chromium steels and influence on the corrosion fatigue behaviourThe corrosion fatigue behavior of two ferritic stainless steels, with 18% and 28% chromium respectively, embrittled by α'- or sigma-phase has been studied in this investigation. No effect of the α'-phase on the corrosion fatigue behaviour in a 0.5 N or 4 N air saturated soldium chloride solution at 80 °C has been found. In the 4 N solution corrosion fatigue cracking of the 18% chromium steel in the solutionized as well as in the α'-embrittled condition is initiated by pitting at nonmetallic inclusions. Sigma-phase not only decreases the mechanical properties of the 28% chromium steel by heavy embrittlement but also leads to crack initiation by pitting in the 4 N solution at the interface sigma/ferrite. The pronounced decrease of the corrosion fatigue properties of the 28% chromium steel could well be correlated with chromium depletion of the ferrite matrix by precipitation of sigma phase.
Notes:
Der Einfluß der versprödenden Phasen α' und σ auf das Schwingungsrißkorrosionsverhalten der beiden rein ferritischen Chromstähle 1.4522 und 1.4575 (18% bzw. 28% Chrom) wurde untersucht. Sowohl in der 0,5 N als auch in der 4 N Natriumchloridlösung konnte keine Beeinflußung der Korrosionseigenschaften durch α'-Ausscheidung festgestellt werden. In Luft und der 0,5 N Lösung bewirkt die Ausscheidung von α'-Phase bei beiden Stählen eine Erhöhung der Schwingfestigkeit. Der Abfall der Korrosionsschwingfestigkeit in der 4 N Natriumchloridlösung wird beim 18%-Chromstahl, im lösungsgeglühten und α'-versprödeten Zustand, durch Lochfraß an nichtmetallischen Einschlüssen herbeigeführt. Die durch die α'-Ausscheidung hervorgerufene, stärker lokalisierte Oberflächenverformung führt beim 28%-Chromstahl in der 4 N Lösung ebenfalls zur Erniedrigung der Korrosionsschwingfestigkeit. Die sigma-Phase verschlechtert einerseits die mechanischen Eigenschaften des 28%-Chromstahles und bewirkt in der 4 N Lösung Bildung von Lochfraß an der Grenzfläche sigma-Phase/Ferrit. Die Bildung von Lochfraß konnte eindeutig auf Chrom- und Molybdänverarmung in der'Ferritmatrix zurückgeführt werden.
Additional Material:
17 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19850360602
Permalink