ISSN:
1432-0630
Keywords:
72.20.Ht
;
72.80.Sk
;
78.30.Ly
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
Abstract In this contribution we have studied the key electrical parameters of silica aerogels and of silica-aerogel-based composites, namely the dielectric constants ɛ, the dielectric losses tan δ (at 1 kHz), and the breakdown fields E b (at 50 Hz). For low-density bulk silica aerogels we find ɛ=1.25 and tan δ=0.0005. E b is about 500 kV/cm in quasi-homogeneous fields, and of the order of MV/cm in strongly inhomogeneous fields. The dielectric constants of partially densified aerogels increase linearly with density; their dielectric losses are relatively large and their breakdown fields are comparativiely low. The same results are found for aerogels in the form of settled materials, i.e. aerogel granules and powders in air. Acrylate-based aerogel composites with volume fractions larger than 70% have low dielectric constants but their losses are at least 10 times higher than those of low-density aerogels. These materials sustain high local fields in the MV/cm region, while in quasihomogeneous fields, breakdown occurs at about 100 kV/cm. Based on the present results and the interplay with other physical properties (low mechanical resistance, low thermal conductivity, adsorption of water, etc.), silica aerogels and silica aerogel-acrylate-based composites are predicted to have a low potential for electrical insulation.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00332286
Permalink
