ISSN:
1741-2765
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Stress-induced optical birefringence in transparent materials has long been a common technique of stress analysis. Although stress-induced acoustic birefringence was discovered more than 20 years ago, its development and actual applications are still limited. This paper will look at the similarities and differences between the propagation of light waves in photoelastic materials and the propagation of ultrasonic waves in deformed solids. Critical comparisons of the experimental methods employed in photoelasticity with those available in modern ultrasonic measuring technique show why previous studies on ultrasonic measurement of stresses were not very successful. A new experimental technique is devised for using ultrasonic waves for stress analysis. The technique employs a single rotatable 10-MHz shear transducer as the transmitter and receiver of ultrasonic pulses. The enlarged display of the 10-MHz modulated-pulse pattern of reflected echoes provides a convenient way to determine the directions of principal axis of the stress within ±3 deg. The pulse-echo-overlap method is used to measure the absolute velocities of the two principal shear waves. The difference in principal stresses is then calculated from the velocity measurements. Test results of common structural-aluminum and steel specimens under uniaxial compression show a linear relation between the velocity changes and the applied stress. Ultrasonic measurements of stress distribution in a 6.35-cm diameter, 1.9-cm-thick aluminum disk under diametric compression are also reported.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF02323061
Permalink