ISSN:
1573-1634
Keywords:
NAPL
;
hydraulic conductivity
;
permeability
;
slurry walls
;
soil
;
bentonite
Source:
Springer Online Journal Archives 1860-2000
Topics:
Geosciences
,
Technology
Notes:
Abstract Soil‐bentonite slurry walls are designed to inhibit the subsurface movement of contaminants from hazardous waste sites. Although it is generally accepted that high concentrations of organic compounds will adversely affect soil‐bentonite slurry walls and clay liners, previous research investigating the effects of NAPLs on the conductivity of clay wall materials has been inconclusive. In this study the effects of various organics (benzene, aniline, trichloroethylene, ethylene dichloride, methylene chloride) on the effective conductivity of a typical soil‐bentonite slurry wall material were studied under two effective stress conditions, 200 and 52 kPa. The hydraulic conductivity for the soil‐bentonite material permeated with water averaged 1.52×10-8 cm s-1. Compared to water, there was little change in conductivity when the sample was permeated with a solution containing a NAPL compound at its solubility limit, except for aniline. However, there was a one to two order of magnitude decrease in conductivity when the sample was permeated with a pure NAPL for all NAPLs tested. When the soil‐bentonite material was permeated with a water/NAPL/water/NAPL sequence, the conductivity decreased one to two orders of magnitude when a NAPL was introduced following water; however, when water was reintroduced after the NAPL, the conductivity increased to the initial hydraulic conductivity. The conductivity again decreased one to two orders of magnitude when the NAPL was reintroduced. This trend occurred for all NAPLs tested, and the fluid properties of the NAPL compounds alone did not account for the decrease in conductivity compared to water.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1006655015509
Permalink
