ISSN:
0271-2091
Keywords:
Confined flow
;
Swirling flow
;
k-ε Model predictions
;
Engineering
;
Engineering General
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Predictions were performed for two different confined swirling flows with internal recirculation zones. The convection terms in the elliptic governing equations were discretized using three different finite differencing schemes: hybrid, quadratic upwind interpolation and skew upwind differencing. For each flow case, calculations were carried out with these schemes and successively refined grids were employed. For the turbulent flow case the k-ε turbulence model was used. The predicted cases were a laminar swirling flow investigated by Bornstein and Escudier, and a turbulent low-swirl case studied by Roback and Johnson. In both cases an internal recirculation zone was present. The laminar case is well predicted when account is taken of the estimated radial velocity component at the chosen inlet plane. The quadratic upwind interpolation and skew upwind schemes predict the main features of the internal recirculation zone also with a coarse grid. The turbulent case is well predicted with the coarse as well as the finer grids, the skew upwind and quadratic upwind interpolation schemes yielding results very close to the measurements. It is concluded that the skew upwind scheme reaches grid independence slightly before the quadratic upwind scheme, both considerably earlier than the hybrid scheme.
Additional Material:
13 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/fld.1650120302
Permalink
