Bibliothek

feed icon rss

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
  • 1
    ISSN: 1420-908X
    Quelle: Springer Online Journal Archives 1860-2000
    Thema: Medizin
    Notizen: Abstract Effect of alcoholic extract of salai guggal (AESG) was studied on cellular and humoral immune responses in mice and leucocyte migration in rats. Oral administration of AESG strongly inhibited the antibody production and cellular responses to sheep red blood cells in mice. It inhibited the infiltration of polymorphonuclear leucocytes and reduced the volume of pleural exudate in carrageenan induced pleurisy in rats. It showed no cytotoxic effect.
    Materialart: Digitale Medien
    Bibliothek Standort Signatur Band/Heft/Jahr Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    ISSN: 1619-7089
    Schlagwort(e): Radionuclide impurities ; Dose to the patient ; 99mTc-sodium pertechnetate ; Fission product 99Mo ; European Pharmacopoeia
    Quelle: Springer Online Journal Archives 1860-2000
    Thema: Medizin
    Notizen: Abstract Radionuclide impurities of radiopharmaceuticals do not provide any diagnostic information, but contribute to the radiation dose to the patient. For 99mTc, even small amounts of long lived radionuclide impurities may contribute significantly to the dose from 99mTc itself. In this preliminary study, estimates have been made for the radiation dose to specific organs and for the effective dose equivalent from impurities in 99mTc-sodium pertechnetate prepared from fission product 99Mo. In addition to 99Mo, 131I, 103Ru, 89Sr and 90Sr at maximum permissible levels as stipulated in the European Pharmacopoeia, 110mAg and 239Pu were taken as representative nuclides for beta-gamma emitters and alpha emitters. Using all of these radionuclides at such maximum permissible levels of impurity as stated in the European Pharmacopoeia, the total contribution from the impurities to the effective dose equivalent is approximately 30% of the effective dose equivalent from 99mTc-pertechnetate. In terms of specific organs, the liver and kidneys can receive doses of 3–4 times and 1–3 times the dose from 99mTc-pertechnetate itself. Although these are worst case calculations, a consistent approach should be reconsidered to limit the additional effective dose equivalent from impurities to e.g. 10% of the effective dose equivalent from 99mTc itself.
    Materialart: Digitale Medien
    Bibliothek Standort Signatur Band/Heft/Jahr Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 26 (1986), S. 768-775 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: The strength and durability in wet environment of aluminum/epoxy/aluminum joints are investigated as a function of structural changes of γ aminopropyltriethoxy silane (γ-APS) primer at the interface. Both dry and wet strengths exhibit strong dependencies on both the thickness and the extent of drying of γ-APS prior to joint formation. Generally, dry strength decreases with increasing thickness of γ-APS primer, and increases with dehydration of γ-APS at any given thickness. Strength retention of the joints after exposure to water at 55°C also improves dramatically when the adsorbed γ-APS is extensively dried. These results are analogous to earlier observations with α-Al2O3/polyethylene joint system. In aluminum joints, porous oxide substrate facilitates the mechanical interlocking mechanism, and its interplay with both the thickness and the extent of cure of γ-APS is analyzed by characterizing the fractured surfaces using scanning electron microscopy (SEM) electron spectroscopy for chemical analysis (ESCA).
    Zusätzliches Material: 8 Ill.
    Materialart: Digitale Medien
    Bibliothek Standort Signatur Band/Heft/Jahr Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    Digitale Medien
    Digitale Medien
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 25 (1985), S. 1171-1178 
    ISSN: 0032-3888
    Schlagwort(e): Chemistry ; Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Maschinenbau , Physik
    Notizen: Unprimed sapphire/nylon 6 peel joints (2.13 ± 0.27 Kg/cm) are found to be stronger than sapphire/polyethylene joints (0.06 ± 0.02 Kg/cm). Priming the sapphire with γ-aminopropyl triethoxy silane (γ-APS) improves the strength significantly resulting in adherend failure in the nylon. The rate and extent of degradation is lower with priming. The optimal silane thickness is about 1900 Å, obtained with a 0.3 percent γ-APS solution, for a five day exposure to water at 25°C. Peel joints made with 0.3 percent γ-APS film, both dried at 25°C (standard conditions) and dehydrated at 110°C under vacuum, fail cohesively when exposed at 25°C. Increasing the exposure to 55°C in a second step results in strength degradation only with dehydrated films. Lower joint strengths are obtained with five days exposure as compared to one day exposure. However, if the temperature is raised to 65°C the joints primed with standard dried films now begin to degrade and lose 90 percent of their strength in five days. Further, the nylon 6 peel joints made with a 0.3 percent γ-APS film, dehydrated for three days prior to lamination, show 10 times greater wet strengths than the corresponding PE joints. Failure surface analyses by ESCA and SEM suggest that failure locus due to water degradation is within the γ-APS layer and the failure mode is cohesive. Failure mechanics during testing the wet peel joints may also cause a partial interfacial failure mode. The effects of the silane film thickness, dehydration condition, time, and temperature dependence of the peel strength degradation indicates that the structure of the γ-APS layer plays an important role in the promotion and retention of adhesion with a thermoplastic polymer system capable of limited primary interactions through possible interdiffusion with the silane layer.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Bibliothek Standort Signatur Band/Heft/Jahr Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...