ISSN:
1432-0630
Keywords:
81.60.bu
;
82.65.Nz
;
42.60.Kg
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
Abstract The 308 nm XeCl laser assisted etching process of thin Al metal films on Si substrate in Cl2 gas was investigated. Etch rates were measured versus the laser fluence on the sample, the laser repetition rate, the Cl2 pressure and the sample temperature. Irradiation experiments under vacuum of films which were previously exposed to Cl2, and laser assisted etching in rare gases, nitrogen and air mixtures with Cl2 were also performed to elucidate the mechanism of the etching process. The surface morphology was investigated by scanning electron microscopy. The results show that a) Etch rates of up to about 1.5 μm per pulse are obtained which are strongly dependent on the Cl2 pressure and sample temperature. b) The etching mechanism is essentially a chemical chlorination of the Al in between the laser pulses which is followed by photo-ablation of the reaction products, c) AlCl3 evaporation and redeposition processes can explain the observed results. d) The Al films can be etched fully and cleanly without damage to the smooth Si substrate. e) Etching through adjacent or imaged mask on the Al film yielded relatively smooth and well defined Al walls with structures of the order of 1 μm.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00616586
Permalink
