ISSN:
1573-4889
Keywords:
Ni-Mo alloys
;
ternary additions
;
sulfidation
;
MoS2, intercalation
;
Al0.55Mo2S4
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Five ternary additions, Cr, Ti, Mn, V, and Al were studied at equi-atomicpercent levels (17 a/o) for their effect on the sulfidation behavior of Ni-19a/o Mo (28–30 w/o) over the range of 600–800°C in 0.01 atm S2. Al was by far the most effective addition. A linear decrease in log kp vs. Al content was observed up to 7.5w/o Al, beyond which no further change was observed. All alloys followed the parabolic rate law. Arrhenius plots gave activation energies of 36.9–41.2 Kcal/mol for alloys containing Ti, Cr, Mn, and V, whereas the activation energies for Al-containing alloys were 47.2 Kcal/mol, indicating that a different diffusion process was involved. Complex scales were formed on all alloys, consisting of an outer layer of Nis1+x and complex inner layers which depended upon alloy composition. Two alloys, those with Cr and Mn, formed intermediate layers of Cr2S3 and MnS, respectively, but these layers had little effect on the kinetics. MoS2 was a constituent of the inner scales except for the alloys with Al. A ternary sulfide, Al0.55Mo2S4 and Al2S3 were observed. The presence of the mixed sulfide was always associated with the low sulfidation rates. The formation of MoS2 on alloys results in a different, less-protective behavior than for MoS2 formed on pure Mo. This effect is due to the intercalation of Ni into MoS2 in octahedral positions between the weakly bonded layers of covalently bonded sheets of trigonal prisms. The size of Al+3 is too small to be intercalated, and thus MoS2 is destabilized by Al.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00665672
Permalink