ISSN:
0021-9304
Schlagwort(e):
Chemistry
;
Polymer and Materials Science
Quelle:
Wiley InterScience Backfile Collection 1832-2000
Thema:
Medizin
,
Technik allgemein
Notizen:
Hip replacement implants fabricated using the ASTM F-75 alloy sometimes fail in a sudden catastrophic way. In general, fractures start at microstructural defects subjected to stress-corrosion under chemical attack by body fluids. In this paper the results of a study on the effect of casting parameters on the microstructure of ASTM F-75 are presented. The preheating mold temperature and the liquid temperature were varied between 900 and 1000°C, and 1410 and 1470°C, respectively. Optimum static strength and ductility were obtained when shrinkage microporosity and the volume fraction of M23C6 “eutectic” carbides precipitated at grain boundaries were minimized by increasing the preheating mold temperature to 1000°C and by using intermediate pouring temperatures of 1455°C. Under these casting conditions, however, the solidification rates are low, leading to large grain sizes, which, in turn, reduce the strength of the material under dynamic loading conditions. The volume fraction of the M23C6, “blocky” carbides appears to be independent of the casting conditions; however, their size and spatial distributions determine the strength of the as-cast alloys. © 1997 John Wiley & Sons, Inc.
Zusätzliches Material:
8 Ill.
Materialart:
Digitale Medien
Permalink
