ISSN:
1573-4846
Keywords:
bismuth oxide
;
bismuth silicate
;
thin film
;
sol-gel
;
surface techniques
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
Notes:
Abstract Bi2O3 thin films were prepared by dipping silica slides in ethanolic solutions of tris(2,2′-6,6′-tetramethylheptane-3, 5-dionato)bismuth(III) [Bi(dpm)3] [1] and heating in air at temperatures ≤500°C. Bi4(SiO4)3 homogeneous thin films were obtained from the reaction of the bismuth oxide coating with the silica glass substrate at temperatures higher than 700°C. For heat treatments at temperatures between 600°C and 700°C, Bi2SiO5 coatings were obtained. The composition and microstructure evolution of the films were determined by Secondary Ion-Mass Spectrometry (SIMS), X-Ray Photoelectron Spectroscopy (XPS) and Glancing Angle X-Ray Diffraction (GA-XRD). The synthesis procedure was reproducible and allowed the control of the Bi2O3 phase composition. Moreover, the thin film annealing parameters were correlated with the formation of bismuth silicates, among which Bi4(SiO4)3 (BSO) is very appealing for the production of fast light-output scintillators [2].
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1008660918484
Permalink