ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Minimum contents of alloying constituents required for the formation of oxide layers with high protective effect against oxidation at higher temperaturesFor the formation of an uninterrupted protective oxide layer of an alloying metal such as Al or Be in Cu or Fe, the concentration must be at least so high that the quantity of alloying metal reaching the surface through diffusion is sufficient to provide for the formation of the oxide concerned. Results of tests concerning the oxidation of Cu-Be alloys have shown that this condition. Though necessary, is not sufficient. Even with higher concentrations of the alloying metal, both the latter and the base metal can be oxidized simultaneously if the base metal oxide contains mobile oxygen ions, or if there is, between a compact oxide layer of the base metal and the initial alloy, a porous zone composed of the oxides of both metals, with migration of oxygen molecules in pores. In the same way, it is possible to interpret the results of tests carried out by other authors concerning the oxidation of Cu-Zn and Cu-Ni alloys and the sulphidization of Cu-Al, Cu-Zn and Ag-Zn alloys
Notes:
Für die Bildung einer lückenlosen schützenden Oxydschicht eines Zusatzmetalls wie Aluminium oder Beryllium in Kupfer oder Eisen muß dessen Konzentration mindestens so hoch sein, daß die durch Diffusion an die Oberfläche gelangende Menge des Zusatzmetalls den Verbrauch Diffusion an die Oberfläche gelangende Menge des Zusatzmetalls den Verbrauch für alleinige Bildung des betreffenden Oxyds deckt. An Hand von Versuchsergebnissen für die Oxydation von Cu-Be-Legierungen wird gezeigt, daß die Bedingung zwar notwendig aber nicht hinreichend ist. Auch bei höheren Konzentrationen an Zusatzmetall können Grundmetall und Zusatzmetall simultan oxydiert werden, wenn entweder im Oxyd des Grundmetalls Sauerstoffionen beweglich sind oder zwischen einer kompakten Oxydschicht des Grundmetalls und er Ausgangslegierung eine poröse Zone der Oxyde beider Metalle mit Wanderung von Sauerstoffmolekeln in Poren vorhanden ist. In gleicher Weise können Versuchsergebnisse anderer Autoren für die Oxydation von Cu-Zn udn Cu-Ni-Legierungen und für die Sulfidierung von Cu-Al, cu-Zn und Ag-Zn-Legierungen gedeutet werden.
Additional Material:
6 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19610120502
Permalink