ISSN:
1432-1130
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
Notes:
Abstract Solid sampling graphite furnace atomic absorption spectroscopy (SS-GFAAS) has been used for the determination of traces of heavy metals (Cd, Pb, Cu, Cr, Ni, V and As) in barytes over a wide concentration range, e.g. Cd from 0.023 to 27.0 μg/g and Pb from 1.54 to 3509 μg/g.The necessity of determining heavy metals in commercial barytes (naturally occurring barium sulfate), a mineral important to the oil industry because of its use in drilling muds, is discussed. The problems presented by the analysis of this difficult matrix are elegantly solved by using SS-GFAAS for the direct determination of heavy metals. A high-performance graphite furnace AAS with D2-background correction system and a transversely heated graphite atomizer was used for the investigations. The spectrometer was combined with a mechanical sampling module and an ultramicrobalance. The transfer of solid samples (sample weights 0.031–0.686 mg) into the atomizer was carried out by using an optimized graphite platform as the sample carrier. Calibration curve techniques and standard addition methods were employed using external standards (CRMs). Problems associated with signal deformations like multiple peaks, tailing or shoulders are also discussed and possibilities to solve the problems are given. The influence of the homogeneity of solid samples on the precision and accuracy are shown in a real example. The results obtained by SS-GFAAS were compared with results by other methods like X-ray fluorescence spectroscopy (XRF) and flame AAS after aqua regia microwave extraction. This study has demonstrated that SS-GFAAS is a very powerful and easy-to-use method for quick and accurate analysis of barytes.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s002160051381
Permalink