ISSN:
1573-2614
Schlagwort(e):
Equipment: intravenous systems, intravenous infusion
;
Physiology: veins and tissues
Quelle:
Springer Online Journal Archives 1860-2000
Thema:
Informatik
,
Medizin
Notizen:
Abstract This article describes a model designed to provide an understanding of fluid flow in intravenous systems and human subjects. Experiments were developed which demonstrate that the model can represent common clinical situations. The model depicts physical devices as ideal resistors, pressure sources, and flow sources. The patient's venous system is depicted as a combination of ordinary and Starling resistors. For flows between 0 and 300 ml/hr, both physical devices and patients are adequately represented by a straight line representing the pressure-flow relationship (PFR): pressure = opening pressure + flow × resistance, where the slope is the resistance to fluid flow and the intercept is the opening pressure. The PFR for a normal vein is characterized by a flat slope (vein resistance =22±20 mm Hg/L/hr, mean ± SD) and a low intercept (opening pressure =15±8 mm Hg). The PFR for a partially obstructed vein has a resistance equal to that of an unobstructed vein and an opening pressure elevated approximately equal to the pressure obstructing the vein. For perivascular tissue, the PFR has a steep slope (tissue resistance =1,125±1,376 mm Hg/L/hr), while tissue opening pressure depends on the amount of fluid infused. At the onset of fluid extravasation (infiltration), tissue pressure usually is lower than venous pressure (8±8 versus 15±8 mm Hg), until fluid fills the distensible tissue compartment. In clinical practice, when infiltration or obstruction occurs, flow decreases and the clinician adjusts the roller clamp until correct flow resumes; no problem is obvious. The combined model for the intravenous tubing and venous systems explains the behavior of current clinical infusion devices.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1007/BF01617887
Permalink
