ISSN:
0043-7719
Source:
Springer Online Journal Archives 1860-2000
Topics:
Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Summary Two types of machines, a conventional planer, and a fixed-knife pressure-bar planer were used to prepare matched specimens of sugar maple wood. After adsorption and desorption, both experiments at 21 °C, the EMC, swelling in all principal directions as well as compliance coefficient in radial compression were measured. Two specimen sizes were used for these expe‐riments. For a given equilibrium moisture content, tangential and radial dimensions were greater after desorption than after adsorption, as previously described. When equilibrium was reached by gaining moisture, the wood was stiffer in radial compression compared to when the equilibrium was reached after losing moisture. The magnitude of this phenomenon, second-order effects of moisture sorption, was slightly affected by the type of planing. These effects on swelling were greater for large specimens prepared by conventional planing compared to fixed-knife pressure-bar planing. Small specimens showed similar magnitudes of this phenomenon with both planing methods. No differences between planing methods were found for the radial compliance coefficient measured on either specimen size. Therefore, the second-order effects of moisture sorption appeared to be a bulk phenomenon and not restricted to the superficial layers of wood.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s002260050110
Permalink