ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Radio-frequency-sputtered barium titanium silicate (BST, Ba2Si2TiO8) thin films were grown on crystalline Si (100) substrates and were characterized using wavelength-dispersive spectrometry (WDS), X-ray diffraction (XRD), optical microscopy (OM) and scanning electron microscopy (SEM), and diagonal techniques for dielectric properties. The chemical compositions of the films increasingly deviated from stoichiometry with film thickness. At the initial stage of deposition the grain configuration is dependent on the Si substrate texture. XRD analysis indicates that the BST films deposited at an optimum substrate temperature of 845 °C were strongly c-axis oriented, and that the film orientation is manipulated by substrate temperature and supersaturation. The corresponding film-growth rate in the direction normal to the film surface at 845 °C was 1.95 nm min−1 at the initial stage, and decreased with sputtering time. The as-deposited films have a room-temperature bulk resistivity of 1.8 ×107 Ωm in the direction of thickness and an isotropic surface resistivity of 1.5×103 Ωm. The high-frequency relative dielectric constant, 0.05 at frequencies higher than 9 MHz, is lower than that of many typical piezoelectric materials. The high-frequency impedance character is typical of piezoelectric materials, giving a minimum impedance frequency of 9.0 MHz and a serial resonant frequency at about 9.5 MHz.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00351240
Permalink
