ISSN:
1432-0630
Keywords:
PACS: 42.62.C; 78.20; 79.20.D
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
Abstract. Results are reported on laser polishing of 150–400-μm-thick free-standing diamond films with either a copper vapor laser (510 nm wavelength) or an ArF excimer laser (193 nm wavelength). Studies were focused on three particular goals. First, we aimed at a choice of optimum conditions for laser polishing of thick diamond films. It was shown that the laser polishing conditions and the resulting surface roughness were controlled by varying the angle of incidence of a scanning laser beam and by polishing time. Second, the laser ablation technique was applied to remove a defective layer from the “substrate” side of the diamond plates in order to reduce optical losses due to absorption in this layer. Third, the structure of the laser-graphitized diamond surface was studied using UV, visible, and IR optical spectroscopy techniques in the course of the “step-by-step” oxidative removal of the graphitic layer with increasing temperature of the oxidation in ambient air. Once the graphitic layer was removed, the optical transmission in the UV-visible-IR spectral range of the diamond films polished under optimum conditions was measured and compared with the optical transmission of the mechanically polished diamond films. It was shown that the optical quality (in the long-wave infrared region) of the laser-polished diamond plates was sufficient to reach the transmittance value very close to the theoretical limit.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s003390050975
Permalink
