ISSN:
1460-2695
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract —Low-cycle fatigue properties were investigated on four carbon steels and five low alloy steels specified in JIS (Japanese Industrial Standard) for machine structural use, which are the most commonly used in Japan. Several different heats from each of several representative manufacturers were sampled so as to represent the average fatigue characteristics of current materials. The cyclic deformation behaviour of material was denned by comparing the monotonie yield stress on the extrapolated tensile work hardening curve with the cyclic yield stress in the cyclic stress-strain curve determined by incremental step test. The normalized ferrite-pearlitic steels cyclically hardened, while the quench-tempered martensitic were cyclically stable or softened. The S–N relations derived from the strain-controlled low-cycle tests were compared with the results obtained by load-controlled high-cycle tests. The extrapolated S–N curves based on the cyclic stress-strain curve predicted the fatigue strength in the high-cycle range to be stronger for cyclic-hardening steels, but weaker for cyclic-softening steels. The predicted S–N curves for stable steels coincided with the high cycle test data. The fatigue limit had a proportional relationship with cyclic yield stress, slightly depending on the cyclic deformation behaviour. On the other hand, the cyclic yield stress was found to exhibit a very good linear correlation with the monotonie tensile strength, independent of cyclic deformation behaviour. This explains the empirical law that the fatigue limit is approximately proportional to the tensile strength.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1460-2695.1981.tb01377.x
Permalink
