ISSN:
1611-4663
Keywords:
Heat treatment
;
Vibrational properties
;
Crystallization
;
Atmospheric condition
;
Temperature-time condition
Source:
Springer Online Journal Archives 1860-2000
Topics:
Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Sitka spruce (Picea sitchensis Carr.) wood was heated for 0.5–16.Oh at temperatures of 120°–200°C in nitrogen gas or air. The values for Young's modulus, shear modulus, and loss tangent were measured by free-free flexural vibration tests. X-ray diffractometry was carried out to estimate the crystallinity index and crystallite width. The results obtained are as follows: (1) Density decreased at higher temperatures and longer heating times. The specific Young's modulus, specific shear modulus, crystallinity index, and crystallite width increased during the initial stage and were constant after this stage at 120°C and 160°C, whereas they increased during the initial stage and decreased later when the temperature was high. Loss tangent in the longitudinal direction increased under all conditions, whereas that in the radial direction increased at 120°C and decreased at 160°C and 200°C. (2) From the relation between Young's modulus and moisture content, it can be safely said that Young's modulus is increased by the crystallization and the decrement in equilibrium moisture content, and that crystallization (rather than degradation) is predominant at the initial stage of the heat treatment, whereas the latter is predominant as the heating time increases. (3) It is implied that the specific Young's modulus, specific shear modulus, crystallinity index, and crystallite width decreased more in air than in nitrogen gas because of oxidation in air.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00521878
Permalink
