ISSN:
0021-9304
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Medicine
,
Technology
Notes:
Fiber/matrix interfacial bond strength significantly influences the mechanical behavior of fiber-reinforced polymer (FRP) composites. Interfacial bond strength durability is therefore particularly important in the development of FRP composites for implant applications where diffused moisture may potentially weaken the material over time. In this study, the long-term durability of interfacial bonding in carbon fiber/380 grade polyetheretherketone (C/PEEK) and carbon fiber/polysulfone (C/PSF) composites was investigated after exposure to hygrothermal environments. A single fiber pull-out test was used to quantitatively determine the ultimate bond strength (UBS) of the samples following exposure. Samples were tested at three temperatures (37, 65, and 95°C) for six time periods (0-5000 h) and in two environments (dry and physiologic saline-immersed). A mathematical model based on nth order chemical reaction kinetics was applied to describe the long-term durability of the interface. The results of this study indicate that interfacial bond strengths in C/PSF and C/PEEK (380 grade) composites are significantly decreased by exposure to physiologic saline and are functions of both time and temperature. For each material, the kinetics of degradation analysis predicts further bond strength losses following initial saturation, which then stabilizes at temperature-dependent equilibrium bond strength levels. © 1994 John Wiley & Sons, Inc.
Additional Material:
8 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/jbm.820281012
Permalink
