ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
The GEO 600 gravitational wave detector is currently under construction in Germany. To ensure that the detector sensitivity is not limited by seismic noise above 50 Hz a significant degree of seismic isolation has to be provided for each test mass. To achieve this level of isolation each test mass, which will be made from fused silica (mass ∼14 kg), will be suspended as the final stage of a triple pendulum from an isolation stack consisting of layers of stainless steel masses and graphite loaded silicone rubber. Extending from the stack will be three cantilever springs supporting an upper mass from which a double pendulum stage will be suspended. This double pendulum will incorporate cantilever springs in the upper stage in order to enhance the vertical isolation, and will use fused silica fibers in the lower pendulum stage in order to minimize thermal noise from the pendulum modes. The expected performance from this arrangement of stacks, vertical spring stages, and double pendulums should achieve our goals for seismic isolation. © 1998 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1149054
Permalink
