ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Molybdenum plate was siliconized using Si2Cl6 as a silicon source, and the siliconizing conditions and some of its properties were examined. The siliconizing of the molybdenum plate began by the deposition here and there of island-like MoSi2 deposits 4 to 6μm thick in the initial stage (after 10 min induction time), and then coalescence of the deposits proceeded to form a uniform MoSi2 layer all over the molybdenum plate after 30 min siliconizing time. The weight decrease of the siliconized plate by anodic dissolution in 0.2 M sulphuric acid reduced exponentially with increasing thickness of the MOSi2 layer, and no weight decrease was observed at all above 16μm thickness. The sea water corrosion and sea sand abrasion resistivities of the siliconized molybdenum plate increased with increasing siliconizing temperature and Si2Cl6 flow rate.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF01103524
Permalink