Library

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    Electronic Resource
    Electronic Resource
    Springer
    Journal of materials science 28 (1993), S. 1227-1236 
    ISSN: 1573-4803
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract A microtensile tester consisting mainly of an induction-heated furnace, a 0–2 N load cell, a 0.1/1 μm sensitivity straining device and hot grips has been designed and used to test ceramic single ceramic filaments at 25–1600°C under vacuum (0.1 Pa) or in controlled atmospheres. Both failure strength and Young's modulus were measured with an isothermal gauge length of 30 mm. A system compliance correction was applied for each test temperature and material. The apparatus was used to characterize an ex-poly-carbosilane Si-C-O fibre (Nicalon NLM-202) and an ex-polycarbosilazane Si-C-N experimental single filament almost free of oxygen (γ-ray curing). Both materials exhibit a significant strength loss at 1200–1600°C when tested under vacuum, assigned to a decomposition process with an evolution of gaseous species (SiO/CO or N2) and the formation of a mechanically weak decomposition surface layer. Conversely, the Si-C-N filament undergoes no strength loss when tested in an atmosphere of nitrogen (P=100 kPa) at 1200°C, the decomposition being impeded by the external nitrogen pressure. In all cases, no significant decrease in Young's modulus was observed.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 2
    ISSN: 1573-4803
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract A 15 μm monofilament was extruded from a Yajima's type molten polycarbosilane, stabilized by addition of oxygen and heat-treated at 800 to 1400 °C under an argon atmosphere. Two important phenomena occur during pyrolysis. At 500 to 750 °C, an organic-inorganic state transition takes place with a first weight loss. It yields an amorphous material stable up to about 1100 °C. At this temperature, its composition is close to Si4C5O2. It can be described as a continuum of SiC4 and/or SiC4−x Ox tetrahedral species (and possibly contains free carbon), with a homogeneity domain size less than 1 nm. The amorphous filament exhibits a high strength and semi-conducting properties. Above 1200 °C, a thermal decomposition of the amorphous material takes place with an evolution of gaseous species thought to be mainly SiO and CO, an important cross-section shrinkage and the formation of 7 to 20 nm SiC crystals which are surrounded with a poorly organized turbostratic carbon. The amorphous-crystalline state transition results in a drop in the tensile failure strength and an increase, by four orders of magnitude, in the electrical conductivity which becomes temperature independent. The former effect is due to the crystallization of the filament and the latter to a percolation phenomenon related to the intergranular carbon. The low stiffness is also due to the presence of carbon. It is anticipated that this transition is mainly related to the decomposition of the silicon oxycarbide species. Finally, a 40 to 50 nm layer of turbostratic carbon is formed at the filament surface at 1200 to 1400 °C whose origin remains uncertain. It is thought to be mainly responsible for the formation of the carbon interphase in the high-temperature processing of ceramic matrix composites.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...