ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Stress corrosion cracking of alpha-brass as a function of the annealing temperature, and its connection with other parameters II.The author has studied the stress corrosion susceptibility as a function of the annealing temperature at constant load and constant specimen deformation in 0.1% mercuric nitrate solution. The original state of the metals investigated - brass with 42, 28 and 20% Zn - was 52.3% cold rolled. Optimum resistance is found with relatively stable structures (relaxation at 280 °C, primary recrystalization at about 380 °C and secondary recrystallization above about 755 °C.) Instable pre-stage of such structures exhibit minimum useful life. The most suitable thermal treatment must be read from the time to failure curves which - because of intermediary strengthening and its reversal - frequently exhibit two minima.
Notes:
Untersucht wird die Abhängigkeit der Spannungsrißkorrosion von der Anlaßtemperatur bei konstanter Belastung und konstanter Probenverformung in 0,1%iger Quecksilbernitratlösung. Der Ausgangszustand der untersuchten Metalle - Ms 58, Ms 72, Ms 80 - war 52,3% kaltgewalzt. Optimale Beständigkeit zeigen relativ stabile Gefügezustände (erholtes Gefüge nach Wärmebehandlung bei 280 °C, Primär rekristallisiertes Gefüge nach Wärmebehandlung bei etwa 380 °C und sekundär rekristallisierte Gefüge nach Wärmebehandlung ab etwa 755 °C). Instabile Vorstadien derartiger Gefüge zeigen Minima in der Lebensdauer. Die zweckmäßigste Wärmebehandlung muß aus den Lebensdauerkurven entnommen werden, die häufig wegen intermediärer Verfestigung und Entfestigung zwei Minima aufweisen.
Additional Material:
16 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19730240307
Permalink