ISSN:
1439-6327
Schlagwort(e):
Critical power
;
Anaerobic work capacity
;
Methodology
;
Electrically-braked ergometer
Quelle:
Springer Online Journal Archives 1860-2000
Thema:
Medizin
Notizen:
Abstract This study examined the effect of end-point cadence on the parameters of the work-time relationship determined for cycle ergometry. Eight male subjects completed four maximal tests on an electrically-braked cycle ergometer that regulated a constant power output independent of cadence. The power outputs imposed ranged between an average of 259 W and 403 W, whereas the corresponding durations ranged between 139 s and 1691 s. During each test subjects were required to maintain a cadence of 80–90 rpm. Accumulated time to end-point cadences of 70, 60 and 50 rpm were recorded. The four work-time determinations for each of three end-point cadences were used to determine linear relationships between work and time, yielding both a y-intercept, which represents anaerobic work capacity, and a slope, which is termed critical power (CP), for each end-point cadence. There was a significant increase in the y-intercept as end-point cadence decreased from 70 to 60 rpm (F[1,7]=36.7, p 〈 0.001) or 70 to 50 rpm (F[1,7]=80.1, p 〈 0.001), but not from 60 rpm to 50 rpm (F[1,7]=3.28, p 〉 0.05). In contrast, there was no effect of end-point cadence on CP (F[2,14]=1.89, p 〈 0.05). These results demonstrate that the end-point cadence selected to terminate tests only affects the y-intercept of the work-time relationship. To control for this effect, the cadence at which each test is terminated should be standardised if determination of anaerobic work capacity, as represented by the y-intercept, is required.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1007/BF00238561
Permalink
