ISSN:
1573-4889
Keywords:
Oxidation
;
Fe-Al alloys
;
Al implantation
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Samples of an Fe-6 at.% Al alloy were implanted with doses of 5×1016−3×1017 Al+ ions/cm2 at 100 kV, and subsequently oxidized at 1173 K in O2 gas at 27 kPa. By comparison with the behavior of unimplanted specimens, no effect on oxidation was observed if the dose of implant was less than 1×1017 Al+ ions/cm2. At doses of 1×1017 Al+ ions/cm2 or higher, a change in the oxide scaling morphology was effected from a duplex α-Fe2O3-α-Al2O3 scale to an α-Al2O3-enriched film with a dispersion of α-Fe2O3 nodules. Oxygen uptake by the high-dose samples was due principally to nodule formation and weight gains after 45 hr were lower by 50–70% as compared with the unimplanted material. Nucleation and growth of the nodules occurred only within the first 5 hr of reaction, but their presence acted as an upper limit on the benefits provided by implantation of aluminum. Nodule formation was shown to be characteristic of the oxidation properties of the alloy material, not an extraneous feature introduced by the implantation process itself. Surface preparation prior to implantation had little effect on oxidation: high-dose electropolished samples behaved similarly to mechanically polished samples when implanted to comparable doses.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF00666722
Permalink
