Abstract
Bone cement, used to fix prostheses into the bone, must be sterilized prior to implantation. Two sterilization techniques, γ and β radiation, were investigated, examining the influence upon molecular weight, static and dynamic mechanical characteristics and rheological properties. A number of experimental cements were studied prepared from methylmethacrylate (MMA) co-polymers, either single powders or powder blends, mixed with MMA monomer. It was found that with both γ and β radiation, there was a decrease in molecular weight of all powders, including a MMA/styrene co-polymer, in relation to the radiation dose. This fall in molecular weight resulted in a drop in tensile strength, Young’s modulus and strain to failure of all cements tested. However, the deterioration in mechanical strength was highlighted by the dynamic testing. Fatigue lives of cements after testing in tension–tension, at 2 Hz under load control and irradiated with 25 kGy γ radiation, displayed significant decreases. This result indicated the utmost importance of conducting such tests upon experimental bone cements prior to in vivo use. The rheological time profiles of curing cements were also found to be influenced by 25 kGy γ radiation, with a reduction of complex viscosity after sterilization.
Similar content being viewed by others
References
E. P. LAUTENSCHLAGER, S. I. STUPP and J. C. KELLER, “Functional Behaviour of Orthopaedic Biomaterials”, Vol. 2, “Applications” (CRC Series in Structure Property Relationship of Biomaterials, Boca Raton, FL, 1987) p. 87.
A. CHARLESBY, “Atomic Radiation and Polymers” (Pergamon Press, London, 1960) p. 335.
J. E. WILSON, “Radiation Chemistry of Monomers, Polymers and Plastics” (Marcel Dekker, New York, 1974) p. 369.
MITAB, Sobo, Sweden, “EtO degassing investigation”, private communication, June 1996.
V. PREMNATH, W. H. HARRIS, M. JASTY and E. W. MERRILL, Biomaterials 17 (1996) 1741.
W. L. SAUER, K. D. WEAVER and N. B. BEALS, ibid. 17 (1996) 1929.
S. L. KIM, M. SKIBO, J. A. MANSON and R. W. HERTZBERG, Polym. Engng. Sci. 17 (1977) 194.
J. A. SAUER, Polymer 19 (1978) 859.
J. A. SAUER and G. C. RICHARDSON, Int. J. Fract. 16 (1980) 499.
M. TANAKA, H. YOSHIDA and T. ICHIKAWA, Polym. J. 22 (1990) 835.
L. DONG, D. J. T. HILL, J. H. O’DONNELL, P. J. POMERY and K. HATADA, J. Appl. Polym. Sci. 59 (1996) 589.
T. A. GRUEN, G. M. MCNEICE and H. C. AMSTUTZ, Clin. Orthop. Rel. Res. 141 (1979) 17.
S. K. BHAMBRI and L. N. GILBERTSON, J. Biomed. Mater. Res. 29 (1995) 233.
E. FODEN, D. R. MORROW and J. E. SAUER, J. Appl. Polym. Sci. 16 (1972) 519.
W. R. KRAUSE, J. MILLER and P. NG, J. Biomed. Mater. Res. 16 (1982) 219.
K. L. MARKOLF, M. KABO, D. W. STOLLER, S. A. ZAGER and H. C. AMSTUTZ, Clin. Orthop. Rel. Res. 183 (1984) 246.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
HARPER, E.J., BRADEN, M., BONFIELD, W. et al. Influence of sterilization upon a range of properties of experimental bone cements. Journal of Materials Science: Materials in Medicine 8, 849–853 (1997). https://doi.org/10.1023/A:1018545519964
Issue Date:
DOI: https://doi.org/10.1023/A:1018545519964