Abstract
Uniform or composition-graded C(B) (i.e., boron-containing carbon) interphases in SiC/SiC model microcomposites were characterized by transmission electron microscopy after tensile tests and thermal ageing in air. A specific method was developed to prepare thin longitudinal sections of the tested specimens. Deflection of matrix cracks occurs within the uniform C(B) interphase, as long as its anisotropy remains high enough (i.e., when the boron content is not too high). It takes place close to the most anisotropic layer (i.e. that containing 8 at% of boron) in composition-graded interphases. In both cases, the crack deflection path does not reach the fibre, a feature which is consistent with the good mechanical properties. After ageing in air under tensile loading beyond the proportional limit (600°C; σ=800 MPa), the composition-graded interphase (made of five sublayers in which the boron content increases from 0 at% near the fibre to 33 at% near the matrix) was observed to act as a glass-forming protection, the pyrocarbon sublayer (at the fibre surface) remaining unoxidized.
Similar content being viewed by others
References
C. DROILLARD, J. LAMON and X. BOURRAT, Mater. Res. Soc. Symp. Proc. 365 (1995) 371.
N. FRETY, R. MOLINS and M. BOUSSUGE, J. Mater. Sci. 27 (1992) 5084.
J. LAMON, C. RECHINIAC, N. LISSART and P CORNE, in “Proceedings of the fifth European Conference on Composite Materials”, Bordeaux, 7–10 April 1992, edited by A. R. Bunsell, J. F. Jamet and A. Massiah (EACM-CEC, Paris, 1992) p. 895.
J. LAMON, F. REBILLAT and A. G. EVANS, J. Amer. Ceram. Soc. 78 (1995) 401.
S. JACQUES, A. GUETTE, F. LANGLAIS, R. NASLAIN and S. GOUJARD, in “Proceedings of the second International Conference on High-Temperature Ceramic-Matrix Composites, Santa Barbara, CA, 21–24 August 1995, Ceramic Transactions, Vol. 57, edited by A. G. Evans and R. Naslain (American Ceramic Society, Columbus, OH, 1995) p. 381.
S. JACQUES, A. GUETTE, F. LANGLAIS and R. NASLAIN, J. Mater. Sci. (1997) submitted.
M. H. BERGER and A. R. BUNSELL, J. Mater. Sci. Lett. 12 (1993) 825.
A. G. EVANS, J. Amer. Ceram. Soc. 73 (1990) 187.
S. JACQUES, A. GUETTE, X. BOURRAT, F. LANGLAIS, R. NASLAIN, C. GUIMON and C. LABRUGÈRE, Carbon 34 (1996) 1135.
K. PLOOG, J. Cryst. Growth 24–25 (1974) 197.
L. VANDENBULKE and G. VUILLARD, J. Less-Common Metals 82 (1981) 49.
“Powder diffraction file” (American Society for Testing and Materials, Philadelphia, PA, 1987) file no. 11–0617 and 12–0377.
G-H. M. MA, Y. H. LEE and J. T. GLASS, J. Mater. Res. 5 (1990) 2367.
K. SUZUKI, M. ICHIHARA, S. TAKEUCHI, N. OHTAKE, M. YOSHIKAWA, K. HIRABAYASHI and N. KURIHARA, Phil. Mag. A 65 (1992) 657.
W. ZHU, A. R. BADZIAN and R. MESSIER, J. Mater. Res. 4 (1989) 659.
R. F. DAVIS (ed.), “Diamond films and coatings” (Noyes Publications, Park Ridge, NJ, 1993) p. 303.
K. E. SPEAR and J. P. DISMUKES (eds), “Synthetic diamond: emerging CVD science and technology”. Electrochemical Society Series (Wiley-Interscience, New York, 1994) p. 264.
D. E. PATTERSON, C. J. CHU, B. J. BAI, Z. L. XIAO, N. J. KOMPLIN, R. H. HAUGE and J. L. MARGRAVE, Electrochem. Soc. Proc. 8 (1991) 3.
L. M. LITZ and R. A. MERCURI, J. Electrochem. Soc. 110 (1963) 921.
D. W. McKEE, Carbon 24 (1986) 737.
K. KOBAYASHI, K. MAEDA, H. SANO and Y. UCHIYAMA, ibid. 33 (1995) 397.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jacques, S., Guette, A., Langlais, F. et al. Characterization of SiC/C (B)/SiC microcomposites by transmission electron microscopy. Journal of Materials Science 32, 2969–2975 (1997). https://doi.org/10.1023/A:1018697105911
Issue Date:
DOI: https://doi.org/10.1023/A:1018697105911