Abstract
The gels which are precursors of TiO2 porous materials are prepared by the controlled hydrolysis-condensation of titanium isopropoxide by polymeric method. In the present work, a study of the influence of different experimental conditions (water/alkoxide ratio, solvent/alkoxide ratio and temperature) on the structure and texture of the polymeric gels obtained with the same type of alkoxide has been investigated. The structural and textural modifications for the unsupported materials have been detected using DTA/TGA, XRD, specific surface area and pore size computerized measurements. The optical properties of the supported materials deposited on silicon wafers have been investigated using ellipsometric method. Supported and unsupported porous materials with different structure and texture have been obtained depending on different experimental and thermal treatment conditions.
Similar content being viewed by others
References
B.E. Yoldas, J. Mater. Sci. 21, 1087 (1986).
M.A. Anderson, M.J. Gieselmann, and Q. Xu, J. Membrane Sci. 39, 243 (1988).
M.J. Gieselman, M.A. Anderson, M.D. Moosemiller, and C.S. Jr. Hill, Separation Science and Technology 23, 1695 (1988).
K.N.P. Kumar, K. Keizer, and A.J. Burggraaf, J. Mater. Chem. 3, 1141 (1993).
K.N.P. Kumar, A.J. Burggraaf, T. Okubo, and H. Nagamoto, J. Mater. Chem. 3, 1151 (1993).
C. Lijzenga, V.T. Zaspalis, C.D. Ransijn, K.N.P. Kumar, K. Keizer, and A.J. Burggraaf, in Key Engineering Materials, edited by A.J. Burggraaf, J. Charpin, and L. Cot, Trans. Tech. Publications 61&62, 379 (1991).
Q. Xu and M.A. Anderson, Mater. Res. Soc. Symp. Proc. 132, 41 (1989).
V.T. Zaspalis, W.V. Praag, K. Keizer, J.R.H. Roos, and A.J. Burggraaf, J. Mater. Sci. 27, 1023 (1992).
Q. Xu and M.A. Anderson, J. Amer. Ceram. Soc. 76, 2093 (1993).
M. Zhou, G. Meng, D. Peng, and G. Zhao, in Key Engineering Materials, edited by A.J. Burggraaf, J. Charpin, and L. Cot, Trans. Tech. Publications 61&62, 387 (1991).
M. Crisan, M. Zaharescu, D. Crisan, and L. Simionescu, Proc. 8th CIMTECH, B 13.4, Faenza, Italy (1994) (in press).
M. Zaharescu, M. Crisan, C. Parlog, D. Crisan, N. Dragan, and L. Simionescu, Rev. Roum. Chim. (1995) (in press).
M. Crisan, M. Zaharescu, L. Simionescu, and D. Crisan, in Proceedings of Euromembrane '95, Sept. 18–20, 1995, edited by W.R. Bowen, R.W. Field, and J.A. Howell, University of Bath, Bath, U.K. 1, 341–344 (1995).
K.N.P. Kumar, V.T. Zaspalis, K. Keizer, and A.J. Burggraaf, J. Non-Cryst. Solids 147&148, 375 (1992).
M. Zaharescu, M. Crisan, D. Crisan, M. Gartner, and F. Moise, Rev. Roum. Chim. (1995) (in press).
G. Gusmano, G. Montesperelli, P. Nunziante, E. Traversa, A. Montenero, M. Braghini, G. Mattogno, and A. Bearzotti, J. Ceram. Soc. Jpn. 101, 1095 (1993).
M. Vallet-Regi, J. Pena, A. Martinez, and J.M. Gonzalez-Calbet, J. Mater. Res. 8, 2336 (1993).
J. Livage, M. Henry, and C. Sanchez, Progress in Solid State Chem. 18, 259 (1988).
E.D. Palik, Handbook of Optical Constants of Solids (Academic Press, New York, 1985).
B.E. Yoldas, Applied Optics 19, 1425 (1980).
M. Ylilammi and T. Ranta-Aho, Thin Film Software Package, Private communication.
Rights and permissions
About this article
Cite this article
Zaharescu, M., Crisan, M., Simionescu, L. et al. TiO2-Based Porous Materials Obtained from Gels, in Different Experimental Conditions. Journal of Sol-Gel Science and Technology 8, 249–253 (1997). https://doi.org/10.1023/A:1026449910325
Issue Date:
DOI: https://doi.org/10.1023/A:1026449910325