Abstract
The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.
Similar content being viewed by others
REFERENCES
M. Huguet (1996). The ITER Magnet System, 19th Symposium of Fusion Technology, Lisbon, Portugal, Sept.
M. Huguet (1996). The ITER Magnet System and Plasma Control, 16th IAEA Fusion Energy Conference, Montreal, Canada, Oct.
B. Bareyt et al. (1996). The Switching Network and Discharge Circuit of ITER, 19th Symposium of Fusion Technology, Lisbon, Portugal, Sept.
ITER Detailed Design Report (1996). IAEA ITER project report.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mitchell, N., Alekseev, A., Gallix, R. et al. Magnet Safety Assessment for ITER. Journal of Fusion Energy 16, 25–35 (1997). https://doi.org/10.1023/A:1022504711102
Issue Date:
DOI: https://doi.org/10.1023/A:1022504711102