Abstract
The mechanical properties of two-phase composites are predicted using a rigorous continuum mechanics analysis and an equivalent microstructural transformation approach. This leads to a generalized law of mixtures which is contrasted with the classical linear law of mixtures which requires some explicit assumptions. The generalized law of mixtures enables prediction of a variety of mechanical properties of a two-phase composite with any volume fraction, grain shape and phase distribution. It is shown that the classical linear law of mixtures is a specific case of the generalized law of mixtures. Examples are given from continuous Cu-W composites, the particulate Co-WC system, Al/SiCp composites, α-β Ti-Mn alloys and α-β Cu-Zn alloys for the predictions of properties such as Young's modulus, yield strengths, flow stresses, the overall friction stresses and the overall Hall-Petch coefficients. It is shown that the theoretical predictions by the generalized law of mixtures are in very good agreement with the corresponding experimental results drawn from the literature, for both continuous fibre composites and particulate reinforced systems.
Similar content being viewed by others
References
W. Voight, Wied. Ann. 38 (1889) 573.
I. Tamura, Y. Tomota and H. Ozawa, in “Proceedings of the 3rd International Conference on Strength of Metals and Alloys”, Vol. 1 (Institute of Metals, and Iron and Steel Institute, London, 1973) p. 611.
H. Fischmeister and B. Karlson, Z. Metallkde 68 (1977) 311.
P. D. Funkenbusch, J. K. Lee and T. H. Courtney, Met. Trans. 18A (1987) 1249.
Y. L. Su and J. Gurland, Mater. Sci. Eng. 95 (1987) 151.
S. Ankem and H. Margolin, Met. Trans. 13A (1982) 595.
N. C. Geol, S. Sangal and K. Tangri, ibid. 16A (1985) 2013.
Idem, ibid. 16A (1985) 2023.
H. C. Lee and J. Gurland, Mater. Sci. Eng. 33 (1978) 125.
S. Ankem and H. Margolin, Met. Trans. 13A (1982) 603.
B. Karlson and G. Linden, Mater. Sci. Eng. 17 (1975) 209.
I. Gurland and K. Cho, in “Proceedings of the 7th International Symposium on Stereology”, Vol. 6, Caen, France, 1987, edited by J. L. Chermant (Acta Stereology, Ljubljana, Yugoslavia, 1987) Suppl. III, p. 135.
K. Cho and J. Gurland, Met. Trans. 19A (1988) 2027.
J. Gurland, Trans. Met. Soc. AIME 212 (1958) 452.
Z. Fan, PhD Thesis, University of Surrey (1993).
E. E. Underwood, in “Stereology and Quantitative Metallography”, ASTM STP 504 (American Society for Testing and Materials, Philadelphia, PA, 1972) p. 3.
Z. Fan, P. Tsakiropoulos and A. P. Miodownik, Mater. Sci. Technol. 8 (1992) 922.
Z. Fan, P. Tsakiropoulos, P. A. Smith and A. P. Miodownik, Philos. Mag. 67A (1993) 515.
L. M. Brown and D. R. Clarke, Acta Metall. 23 (1975) 821.
H. Ford, “Advanced Mechanics of Materials” (Wiley, New York, 1963) pp. 115–21, 129–31.
E. O. Hall, Proc. Phys. Soc. Lond. B64 (1951) 747.
N. J. Fetch, J. Iron Steel Inst. 174 (1953) 25.
A. J. E. Foreman, Acta Metall. 3 (1955) 322.
R. Lowrie and A. M. Gonas, J.Appl.phys. 36 (1965) 2189.
B. Paul, Trans TMS-AIME 218 (1960) 36.
H. Doi, Y. Fujiwara, K. Miyake and Y. Osawa, Met. Trans, l (1970) 147.
P. J. Withers, PhD thesis, University of Cambridge (1988).
L. C. Davis, Metall. Trans. 22A (1991) 3065.
S. Ahmed and F. R. Jones, J. Mater. Sci. 25 (1990) 4933.
D. L. McDanels, R. W. Jech and J. W. Weeton, Trans. Met. Soc. AIME 233 (1965) 636.
H. Fischmeister and H. E. Exner, Arch. Eisenhuttenw. 37 (1966) 499.
Z. Hashin and S. Shtrikman, J. Mech. Phys. Solids 11 (1963) 127.
C. Nishimatsu and J. Gurland, Trans. ASM 52 (1960) 469.
B. O. Jaensson and B. O. Sundstrom, Mater. Sci. Eng. 9 (1972) 217.
F. F. Voronov and D. B. Balashov, Phys. Metals Metallogr. 2 (1960) 127.
R. Keiffer and P. Schwarzkopf, in “Hartstoffe und Harmetalle” (Springer, Vienna, 1953).
D. L. McDanels, Metall. Trans. 16A (1985) 1105.
M. W. Mahoney, A. K. Ghosh and C. C. Bampton, in “Proceedings of ICCM VI/ECCM2”, Vol. 2, edited by F. L. Mathews itet al. (Eisevier, London, 1987) p. 272.
DWA Composite Specialities Inc., “Guide to Composite Materials” (ASM, 1987).
R. L. Trumper, Metal Mater. (November) (1987) 31662.
W. C. Harrigan Jr, J. Metals (August) (1991) 4332.
A. L. Geiger and J. A. Walker, ibid August (1991) 8.
S. Spanoudakis and R. J. Young, J. Mater. Sci. 19 (1984) 487.
S. Ahmed and F. R. Jones, Composites 21 (1990) 81.
P. J. Withers, W. M. Stobbs and O. B. Pedersen, Acta Metall. 37 (1989) 3061.
S. Ankem and H. Margolin, Met. Trans. 17A (1986) 2209.
J. S. Park and H. Margolin, ibid. 15A (1984) 155.
P. Uggowitzer and H. P. Stuwe, Z. Metallkde 73 (1982) 277.
E. Werner and H. P. Stuwe, Mater. Sci. Eng. 68 (1984–1985) 175.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fan, Z., Tsakiropoulos, P. & Miodownik, A.P. A generalized law of mixtures. JOURNAL OF MATERIALS SCIENCE 29, 141–150 (1994). https://doi.org/10.1007/BF00356585
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00356585