ISSN:
0001-1541
Keywords:
Chemistry
;
Chemical Engineering
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Process Engineering, Biotechnology, Nutrition Technology
Notes:
Extraction studies were made with the systems toluene water benzoic acid and kerosene water benzoic acid in two dimensionally similar cylindrical extractors, one 6 in. in diameter by 6 in. high, the other 12 in. in diameter by 12 in. high. Each extractor contained four radial baffles, of width equal to 16.7% of the extractor diameter. The extractors were agitated by six-bladed dimensionally similar turbine impellers, the diameters of which were in each case one third the diameter of the extractor.When the extractors were full of liquid, i.e., in the absence of an air-liquid interface, the power required for a given impeller speed was independent of the rate of flow of liquid. However, such operation required more power than the equivalent open-tank agitator, and more baffling was required to produce fully turbulent flow.Flow rates were varied from 0 to 4,000 lb./hr. and solvent-to-water mass ratios from 3:1 to 1:6. Extraction stage efficiencies were found to be appreciable even at zero agitator speed.The additional stage efficiency produced by agitation was found to be a function of the power input per unit volume of liquid flowing. This relationship permitted the correlation of all extraction efficiency data for a given system at a constant solvent-to-water ratio over eight-fold range of power input. It was found possible to predict the performance of an extractor in continuous flow from batch-extraction measurements through the methods of MacMullin and Weber.
Additional Material:
8 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/aic.690010309
