ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Recent investigations into inorganic and organic coatings on steel, galvanized steel and aluminium, using an accelerated cor- rosion test according to Machu-SchiffmanThe method constitutes the improvement with respect to the salt spray method. It is based on a weakly acid solution i. e. specifically 5% NaCl solution with addition of a small quantity of hydrogen peroxide. This solution is used for immersion tests and, as to aggressivity, is comparable to industrial and marine atmospheres; the duration of the test, however, is considerably reduced (about I5 hours). A typical and optimum composition is 50 g/l NaCl, 10 millglacial acetic acid and 5 81130% HzOz, pH = 3.0. In the case of galvanized steel or zinc it is of advantage to use a solution containing 50 g/l NaCl and 10 mlJl30% HzOz. pH = 6.0. As to alumini- um both solutions can be used, depending on the aggressivity to be simulated. Duration of immersion of 16 hours at 23 OC in the solu- tion of pH 3.0 would correspond in the case of coated aluminium to 336 hours exposure to salt spray.
Notes:
Die Methode stellt gegenüber der Salzprüfung eine Verbesserung dar; man arbeitet mit einem schwachsauren Medium, nämlich einer Lösung von 5% NaCl mit einer geringen Menge Wasserstoffsuperoxid. Diese Lösung wird im Tauchversuch eingesetzt und ist hinsichtlich ihrer Aggressivität vergleichbar mit Industrie- und Meeresatmosphäre, wobei die Versuchsdauer ziemlich stark verkürzt ist (etwa 15 Stunden). Die optimale typische Zusammensetzung ist 50 g/l NaCl, 10 ml/1 Eisessig, 5 g/l 30%iges Wasserstoffsuperoxid, pH = 3,0. Im Falle von verzinktem Stahl oder Zink verwendet man vorteilhafterweise eine Lösung aus 50 g/l NaCl und 10 ml/l 30%iges Wasserstoffsuperoxid (pH = 6.0). Bezüglich Aluminium können je nach der zu simulierenden Aggressivität beide Lösungen verwendet werden. Im Falle von beschichtetem Aluminium entspricht eine Tauchdauer von 16 Stunden bei 23°C in der Lösung mit pH 3,0 einem Salzsprühnebelversuch von336 Std. Dauer.
Additional Material:
1 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19740250306