ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Corrosion of copper-aluminium alloys in sulfuric acid containing pickling solutionsWrought copper aluminium alloys (aluminium contents between 5 and 10 weight-%, additions of Fe, Ni and Mn) have been studied by continous and alternating immersion tests in a solution containing 20% H2SO4 and 10% FeSO4 at 40°C. In the as-extruded state the corrosion of monophasic alpha alloys increases with aluminium content. Larger quantities of ß' martensite exercise a negative effect. Addition of 2 weight-% Ni do not improve the corrosion resistance of the alloys with 5 and 8% Al. Cold reduction of alpha alloys give rise to a pronounced intensification of corrosion. No positive effect can be obtained by a thermal treatment of the alloys CuAl 10 Fe 4 Mn Ni and CuAl 10 Fe 4 Ni 5. The corrosion takes place under the following forms: uniform corrosion (CuAl 5), preferred corrosion of grain boundaries (CuAl*, Cual 9, Mn 2 FeNi and CuAl 10 Fe 4 Ni 5 after thermal treatment) and dealuminisation (CuAl 10 Fe 4 Mn 3 Ni). With a view to corrosion resistance the alloys CuAl 5, CuAl8 CuAl 9 Mn and - probably - CuAl 8 Fe seem to be superior to the others.
Notes:
Kupfer-Aluminium-Knetlegierungen (Al-Gehalte zwischen 5 and 10%), Zusätze von (Fe, Ni und Mn) wurden im Dauer- und im Wechseltauchversuch in einer Lösung mit 20% H2SO4 and 10% FeSO4 bei 40 °C untersucht. Im stranggepreßten Zustand nimmt die Korrosion der einphasigen alpha-Legierungen mit dem Al-Gehalt zu. Größere Menge and ß' - Martensit wirken sich negativ aus. Zusätze von 2 Gew.-% Ni verbessern die Korrosionsbeständigkeit der Legierungen mit 5 und 8% Al nicht. Kaltverformung der alpha-Legierungen führt zu einer beträchtlichen Verstärkung der Korrosion. Wärmebehandlung der Legierungen CuAl 10 Fe 4 Mn 3 Ni und CuAl 10 Fe 4 Ni 5 hat keine positive Wirkung. Die korrosion tritt unter den folgenden Formen auf: Flächenkorrosion (CuAl 5); bevorzugte Korrosion der Korngrenzen (CuAl 8, CuAl 8, CuAl9 Mn 5 FeNi und CuAl 10 Fe 4 Ni 5 nach Wärmebehandlung); Entaluminierung (Cual 10 Fe 4 Mn 3 Ni). Bezüglich der Korrosionsbeständigkeit sind die Legierungen CuAl 5, CuAl 8, CuAl 9 Mn und - wahrscheinlich - CuAl 8 Fe am günstigsten.
Additional Material:
10 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19740250602