ISSN:
0360-6376
Keywords:
Physics
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
Notes:
Mixtures in various proportions of natural rubber (NR) and each of two tackifier resins, a poly-β-pinene and a modified pentaerythritol rosin ester, were used as the adhesive layer in joining a flexible polyester strip to a plane glass substrate. Measurements of the force required to peel the strip from the glass at a 90° angle were made over a range of pulling rates at several temperatures. Application of time-temperature superposition enabled a master curve of (reduced) peel force versus (log) pulling rate at a standard temperature (296 K) to be obtained for each adhesive composition. The master curves showed, in increasing order of pulling rate, some or all of four different modes of peeling: (i) peeling with viscous adhesive response, (ii) peeling with rubbery response, (iii) oscillatory or slip-stick peeling, and (iv) peeling with glassy adhesive response. In general, transitions between the different peeling modes were quite abrupt. Increase in concentration of tackifier resin caused displacement of the master curve toward lower pulling rates [an effect interpreted in terms of an increasing adhesive glass temperature (Tg)], and a superimposed displacement of the transition between peeling modes (i) and (ii) toward higher pulling rates-an effect attributed to reduction in adhesive average molecular weight. The influence of the tackifier resin in modifying the viscoelastic characteristics of the adhesive was further demonstrated in a comparison of the peel force master curves with corresponding master curves of dynamic storage modulus.
Additional Material:
6 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/pol.1980.170180818
