ISSN:
0025-116X
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Physics
Notes:
The emulsion copolymerization of acrylonitrile and butyl acrylate initiated by potassium peroxodisulfate (K2S2O8) in the presence of an anionic, cationic, or nonionic emulsifier has been kinetically investigated at 60°C under batch conditions by gas chromatography (GLC) and gravimetric methods. It is found convenient to define three stages of emulsion polymerization. In the range of low conversion (interval 1) are generated particles and the rate of polymerization increases with increasing polymer particle concentration. In interval 2 (ca. from 15 to 70% conversion) the number of polymer particles and the rate of polymerization (maximum) are constant. At very high conversion (above ca. 70% conversion) the monomer concentration within polymer particles decreases abruptly and the polymerization rate slows down (interval 3). The rate of polymerization in interval 2 was found to be proportional to the 0,41, 0,48, and -0,42 power of the emulsifier concentration for the anionic, nonionic, and cationic emulsifier, respectively. The dependence of the final particle number on the emulsifier concentration deviates from simple micellar theory predictions. The exponent of the emulsifier concentration decreases with increasing emulsifier concentration (for the anionic and nonionic emulsifiers). These results were explained by a coagulative nucleation mechanism. The unexpected polymerization behaviour in the presence of the cationic emulsifier was explained by the formation of a product (due to interaction of the initiator with the emulsifier).
Additional Material:
9 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/macp.1988.021890209
