ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Surface alloys were made on mild steel, coated with nickel and chromium using laser surface alloying. Mild steel was coated with a composite layer of nickel and chromium using the plasma technique. This was followed by laser irradiation using a continuous carbon dioxide laser. Oxidation and corrosion behaviour of these alloys was then determined by carrying out oxidation in air at 800 °C and corrosion tests at room temperatures in 1 n H2SO4. With a 75 μm layer of nickel and chromium each, it was possible to make surface alloys on mild steel, which had a chromium concentration of 6–7 wt%, but the nickel concentration varied from 10–20 wt%. Oxidation behaviour improved significantly over the as-coated specimen and aqueous corrosion improved considerably.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/BF01153079
