ISSN:
1432-1858
Source:
Springer Online Journal Archives 1860-2000
Topics:
Electrical Engineering, Measurement and Control Technology
,
Technology
Notes:
Abstract Complex microstructures can be fabricated in large quantities by thermoplastic molding processes. The shape of the microstructures is determined mainly by the mold insert. Until now, multi-level mold inserts have been fabricated either by deep etch X-ray lithography and electroforming, Harmening et al. (1992), or by milling of a brass substrate, Schaller et al. (1995). In both cases there are limitations on structuring either by the fabrication effort or by the sizes of the smallest available milling heads. To avoid these limitations on structuring, a new process for manufacturing multi-level mold inserts has been developed at Forschungszentrum Karlsruhe. Milling, drilling, deep etch X-ray lithography and electroforming have been combined to manufacture a mold insert which is characterized by high aspect ratios with small lateral dimensions and various level heights. Samples with two levels and an aspect ratio of 15 have been manufactured. Much higher aspect ratios seem to be achievable. This paper covers the fabrication process, first tests, and experimental results of manufacturing a multi-level mold insert for molding three-dimensional components of a microvalve system.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s005420050039
