ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
An adjustable resonance cavity was developed to measure the complex permittivity of dielectric materials. The cavity has an inner diameter of 16.400 cm and an inner height of 2.54 cm. The aluminum stationary wall holder was positioned about 10.8 cm above the top of the cavity. It was fixed into place by three 1.27-cm-diam linear shafts. By suspending from the wall holder, the movable wall moved vertically by sliding on 1.27 cm bore-closed ball bushings. By turning a 1 in.-12 nut, the movable wall could be positioned so that the cavity height equaled the height of the sample. Therefore, this enables the measurement of the permittivity of samples with heights between 0.88 and 1.91 cm and radius between 1.27 and 3.18 cm. The complex permittivity of the sample was calculated based upon the sample dimensions, central frequency of TMono modes, and Q factor of the resonance curve using an exact solution. The complex permittivity was measured at the three lowest modes, where the frequency span is 1–4 GHz. © 2000 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1304865
