ISSN:
1460-2695
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Fatigue crack growth under constant and random loading conditions was investigated for a metastable austenitic-bainitic steel in comparison with a ferritic chromium steel at very low crack growth rates. Experimentally determined random crack growth was compared with linear Miner calculations on the basis of constant amplitude results. It was found that the measured crack growth rates in transforming material are a factor of 10 lower than the calculated values, whereas the difference is only a factor of 2 for the ferritic steel. The reason for the pronounced crack growth retardation in the metastable alloy is transformation of part of the austenitic phase into martensite in the stress field of the crack tip, accompanied by a volume increase and, consequently, residual compressive stresses. Rare high load cycles in the random sequence increase the closure level, which then leads to pronounced retardation of fatigue crack growth for the numerous successive low amplitude cycles.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1460-2695.1995.tb00918.x
