ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Automatic measuring of contact corrosion parameters and their interpretation by means of polarization diagramsTo evaluate the danger of contact corrosion on coupled dissimilar metals, the corrosion potentials of the concerned metals, the mixed corrosion potential and the current between the galvanic couple are of interest. A test stand with 6 sets has been developed to determine these values simultaneously and automatically from 6 variations of metal couple electrolyte/electrolyte's condition/temperature. Every set is equipped with two electrolytic cells. One cell is for measuring the corrosion potentials of the two metal probes in an open circuit; in the other cell an identical metal couple is arranged in a short circuit, so that the mixed potential and the current of the contact couple can be monitored. The values are called in sequence in a pre-selected manner by a scanning unit and are then recorded.From couples obtained from combinations of mild steel, CrNiTi-steel, NiCrFe-alloy, and Molybdenum alloy (0,5 Ti and 0,1% Zr), the mild steel proved to be always the least noble whilst the Molybdenum alloy was the most noble; this was true in both alcaline and acid electrolytes. By plotting the measured values on a polarization diagram, a survey of the possible contact corrosion behaviour in several systems may be obtained together with information on the corrosion mechanisms occurring.
Notes:
Zur Beurteilung der Kontaktkorrosionsgefahr an einer Werkstoffkombination interessieren die Ruhepotentiale der beteiligten Werkstoffe, das Mischpotential des Kontaktelementes und der Elementstrom. Es wurde ein Prüfstand mit 6 Meßplätzen entwickelt, auf dem diese Daten von 6 Varianten von Werkstoffkombination/Lösung/Lösungskonditionierung/Temperatur gleichzeitig automatisch erfaßt werden. Die Meßplätze sind mit je zwei elektrolytischen Zellen ausgerüstet. Während in der einen Zelle die Ruhepotentiale der beiden Werkstoffproben ermittelt werden, lassen sich in der anderen an einem kurzgeschlossenen identischen Probenpaar das Mischpotential des Kontaktelements und der Elementstrom messen. Die Meßgrößen werden von einem programmierbaren Meßstellenabtaster nacheinander abgefragt und registriert.Bei Werkstoffkombinationen aus einem niedriglegierten Baustahl, einem CrNiTi-Stahl 18 9, einer NiCrFe-Legierung 72 20 und einer Molybdänlegierung mit 0,5% Ti und 0,1% Zr in je einer basischen und einer sauren reduzierenden Lösung ist der unlegierte Stahl stets der unedlere, die Molybdänlegierung stets der edlere Partner. Stellt man die Meßgrößen in Polarisationsdiagrammen dar, so gewinnt man einen überblick über mögliche Kontaktkorrosionen in den verschiedenen Systemen sowie Hinweise auf den Korrosionsmechanismus.
Additional Material:
5 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19780290105
Permalink