ISSN:
0933-5137
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Corrosion Behaviour of the Al-Li-Cu-Mg AlloyThe localized corrosion behaviour of the Al-Li-Cu-Mg alloy 8090-T651 (25 mm thick plate) was investigated using salt spray tests, EXCO tests and tests according to the MIL-H-6088F specification. These accelerated laboratory tests indicate that the material is susceptible to intergranular and exfoliation corrosion. The stress corrosion cracking behaviour was studied under constant load, constant deformation and slow strain rate conditions. The material was found to be resistant against stress corrosion cracking in the long transverse direction. In the short transverse direction a threshold stress below 50 MPa was determined. The same values were measured for the conventional alloys 2014-T351 and 2024-T351. The fracture surfaces of specimens failed due to stress corrosion cracking were examined using a scanning electron microscope. Fractographic features attributed to corrosion were discussed.
Notes:
Eine 25 mm dicke Platte der Al-Li-Cu-Mg Legierung 8090-T651 wurde auf ihre Anfälligkeit gegen Lochfraß, interkristalline Korrosion und Schichtkorrosion hin untersucht. Die lokalen Korrosionseigenschaften wurden mittels genormter Verfahren geprüft; verschiedene Salzsprühnebelprüfungen, die Prüfung nach der Spezifikation MIL-H-6088F und der EXCO Test wurden angewandt. In diesen beschleunigten Prüfverfahren zeigt der Werkstoff eine deutliche Anfälligkeit gegen interkristalline Korrosion und Schichtkorrosion. Das Spannungsrißkorrosionsverhalten wurde unter konstanter Last, konstanter Dehnung und mit langsamer Dehnrate geprüft. In der langen Querrichtung ist der Werkstoff nicht anfällig gegen Spannungsrißkorrosion. In der kurzen Querrichtung liegt die kritische Grenzspannung für Spannungsrißkorrosion unterhalb von 50 Mpa. Vergleichsprüfungen der konventionellen Legierungen 2014-T351 und 2024-T351 führten zu gleichen Ergebnissen. Die durch Spannungsrißkorrosion bedingten Bruchflächen wurden im Rasterelektronenmikroskop auf korrosionsspezifische Merkmale hin untersucht.
Additional Material:
9 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/mawe.19870180808
Permalink