ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Reactivity of Al2O3 and NiAl2O4 in chlorine and chlorine-oxygen mixtures at elevated temperaturesTo test the reaction inhibiting efficiency of Al2O3 or NiAl2O4 as a protective layer formed on Ni-Cr-Al alloys in chlorine at higher temperatures, for the present the rate of chlorination of Al2O3 and NiAl2O4 pellets has been investigated in Cl2 and Cl2-O2-mixtures between 700 and 1000°C. The rate of chlorination of Al2O3 with 5,8 × 10-2 mg/cm2h at 1000°C is significantly smaller than the corresponding rate of NiAl2O4 with 2,6 mg/cm2h at 800 °C. The rate of chlorination of Al2O3 is increased with increasing Cl2 pressure and decreased with increasing O2 pressure. As expected, for NiAl2O4 no oxygen pressure dependence of the chlorination rate was detected.
Notes:
Um die Aussicht auf eine reaktionshemmende Wirkung einer auf einer Ni-Cr-Al-Legierung auftretenden Al2O3 bzw. NiAl2O4-Deckschicht gegen den Angriff von Chlor bei höheren Temperaturen zu prüfen, wurde zunächst die Chlorierung von Al2O3- bzw. NiAl2O4-Presslingen in Chlor und Cl2-O2-Gemischen zwischen 700 und 1000°C untersucht. Die Geschwindigkeit der Chlorierung von Al2O3 ist mit 5,8 × 10-2 mg/cm2h bei 1000°C erheblich geringer als die von NiAl2O4, die bereits bei 800°C 2,6 mg/cm2h beträgt. Die Chlorierung von Al2O3 nimmt mit steigendem Chlor-Partialdruck zu und mit steigendem Sauerstoff-Partialdruck ab. Im Falle des Spinells war keine Sauerstoffdruck-Abhängigkeit beobachtbar.
Additional Material:
4 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19780290307
Permalink