Library

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Publishing Ltd
    Journal of food process engineering 26 (2003), S. 0 
    ISSN: 1745-4530
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: High intensity electric field pulses using varying field strengths (0.5, 1.0 and 2.0 kV/cm corresponding to 12, 48 and 192 J/kg, per pulse, respectively, with a pulse duration of 400μs) and pulse numbers (2 to 50) were applied to apple slices as a pretreatment to study their influence on mass transfer during osmotic dehydration (OD). Cell membrane permeabilzation increased with increasing field strength and higher pulse number. Higher water loss and solids gain were obtained at 1.0 kV/cm. Pretreated apples turned brown but sample brightness improved with OD time but L values decreased with increasing pulse number. Maximum deformative force and amount of strain experienced by dried samples were influenced by both the field strength and OD time. Vitamin C content of dried samples reduced at higher field strengths and longer immersion times.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 2
    ISSN: 1365-2621
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The impact of different pretreatment methods [high pressure (HP), high-intensity electric field pulses and freezing], osmotic solutions (sucrose, glucose and salt–sucrose mix) and osmotic conditions (atmospheric pressure, vacuum and ultrasound treatment) on the mass transfer of strawberry halves during osmotic dehydration (OD) and on some physical characteristics (leaching of cell constituents, colour and texture), were investigated. Highest water loss was obtained in samples treated under vacuum, in a salt–sucrose mix or under HP or in a high-intensity electric field. The increase in solid gain relative to untreated samples was 96–270% for the prefrozen treatment, 40–160% for high pressure and 50–62% for high-intensity electric field treatments. OD under vacuum and the use of glucose solutions facilitated greater solid gain. Leaching of cell constituents was high in prefrozen samples, leading to greater change in product colour and softer texture compared with other pretreatments. Although OD under ultrasound treatment enhanced mass transfer, its overall influence was not significant (P 〉 0.05) compared with atmospheric pressure.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    Oxford, UK : Blackwell Science Ltd
    International journal of food science & technology 32 (1997), S. 0 
    ISSN: 1365-2621
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Process Engineering, Biotechnology, Nutrition Technology
    Notes: The thermal process time and sensory attributes of Ife-BPC cowpeas canned in tomato sauce were studied. Heat resistance of Bacillus stearothermophilus 1518 was determined by the plate count method at 114.5 and 120.6°C. Surviving spores were cultured and TDT curves were plotted from these data to obtain D values of 2.2 ± 0.2 min at 120.6°C and 7.5 ± 0.5 min at 114.5°C. Heat penetration studies were conducted on two can sizes and at two operating temperatures. Thermal process parameters were determined using both the general and formula methods. There was no significant difference (P 〈 0.05) in the process times determined by the two methods although slightly higher values were obtained with the formula method. The medium can size required a longer process time to approach the retort temperature than the small can size. The lethal effect of sterilizing at 120.6°C resulted in a lower D-value, higher sterilizing value (F0), and higher safety ratio (a/b) than at 114.5°C. The final F0 at the end of processing was greater than the targeted F0 (11.0 min) from the 5D value, suggesting that the processing time is adequate for safe food production. Taste panel assessments were conducted to identify optimal processing conditions. The sensory attributes of dry and semi-dry Ife-BPC cowpeas canned in tomato sauce were compared with those of imported baked beans. Semi-dry processed cowpeas had high consumer preference over the dry seeds, and acceptable canning qualities similar to those of the imported baked beans.
    Type of Medium: Electronic Resource
    Library Location Call Number Volume/Issue/Year Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...