ISSN:
1460-2695
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract— —Fatigue crack propagation rates (da/dN) and fatigue crack thresholds (ΔKth) have been studied in a cast Co-Cr-Mo alloy used for surgical implants with various grain sizes. Results for materials with average grain sizes of about 400 and 60μm respectively are presented. Threshold values close to 10–15 MPam have been measured with decreasing values observed on increasing the grain size. Similar effects of grain size are found on the crack propagation behaviour at higher growth rates, where a coarse grain size material show a higher crack growth rate than a fine grain size material at the same ΔK levels. The effects of microstructure on fatigue properties of the cast Co-Cr-Mo alloy are caused not only by grain size variation but are also attributed to the microstructural differences: a coarse-grained material with a directionally grown dendritic structure vs a fine-grained material with an equiaxed grain structure.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1460-2695.1989.tb00537.x
Permalink