ISSN:
1013-9826
Source:
Scientific.Net: Materials Science & Technology / Trans Tech Publications Archiv 1984-2008
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Four different multilayered coatings with different Al concentrations were deposited on AISI D2 steel. The prepared coating samples were designated as WC-Ti0.6Al0.4N, WC-Ti0.53Al0.47N, WC-Ti0.5Al0.5N and WC-Ti0.43Al0.57N. The multilayered coatings were investigated with respect to coating surface and cross-sectional morphology, roughness, adhesion, hardness, porosity and tribological behavior. Especially, wear tests of four multilayered coatings were performed by using a ball-on-disc configuration with a linear sliding speed of 0.017 m/sec and a load of 5.38N. The tests were carried out at room temperature in air by employing AISI 52100 steel ball (HR = 66) with a diameter of 10mm. The surface morphology and topography of the wear scars of samples and balls have been determined by using scanning electron spectroscopy (SEM). Results have showed an improved wear resistance of the WC-Ti1-xAlxN coatings with increasing Al concentration
Type of Medium:
Electronic Resource
URL:
http://www.tib-hannover.de/fulltexts/2011/0528/01/50/transtech_doi~10.4028%252Fwww.scientific.net%252FKEM.297-300.1430.pdf
Permalink