ISSN:
1750-3841
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
,
Process Engineering, Biotechnology, Nutrition Technology
Notes:
SUMMARY– The amount of brown color developed was always determined by reconstituting the sample to 5.6% total solids and measuring optical density (O.D.) of an acetone extract at 420 mμ. Tomato solids at concentrations of 5.6 to 98% were heated for 15 min at 95°C. The O.D. increased slowly with increasing concentration to about 50% solids. Thereafter, the O.D. increased rapidly to a peak at 95% and decreased to half this value at 98%. The effect of heating time at 55, 75 and 95°C and at 5.6 and 45% solids was studied. The browning rate was slight at the lower 2 temperatures relative to that at 95°C, and was much more rapid at the higher concentration than at single strength. Under each temperature and solids condition, the rate of browning was highest at the earlier times. The inhibition effects of pH and SO2 were studied. Browning was at a minimum at pH 2.5. Browning could be further reduced at each pH by increasing levels of SO2. The protective effect of acidification and SO2 addition increased with increasing solids concentration.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1365-2621.1970.tb02000.x
Permalink
