ISSN:
1460-2695
Quelle:
Blackwell Publishing Journal Backfiles 1879-2005
Thema:
Maschinenbau
Notizen:
In order to study creep-fatigue interactions under multiaxial stress states, both push-pull and reversed torsion low-cycle fatigue tests were carried out using an austenitic stainless steel, SUS 304, at 923 K in air. From the tests, it is concluded that the hold-times introduced at the peak strain reduce low-cycle fatigue lives in the push-pull mode, but in the torsional mode they were not so harmful. This difference in the hold-time effect is discussed from considerations of crack formation and propagation and the stress amplitude applied to the specimen.Both maximum principal strain range, Δε1, and the von Mises' equivalent strain range, Δεeq, provide a nearly adequate comparison base for the assessment of biaxial low-cycle fatigue lives in tests without strain hold-time but are inadequate for hold-time tests. An equivalent stress range, Δσ*, which includes the effect of the stress parallel to the fatigue crack and which was previously proposed by the authors for no hold-time tests, is applied to the hold-time tests in the biaxial stress state. It is found that Δσ* is a good parameter for the correlation of biaxial low-cycle fatigue data in both no hold-time and hold-time tests.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1111/j.1460-2695.1984.tb00407.x
Permalink
