ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The chemical resistance of laboratory equipment of Rhodium-Platinum-alloys in analytical operationsIn an effort to improve the mechanical resistance and dimensional stability of platinum laboratory equipment without impairing its chemical resistance, platinum has been alloyed with 5-30 percent of rhodium. In the annealed condition, these alloys have higher tensile strength than normal crucible platinum, not only at room temperature but even at temperatures as high as 1000°C. Practical experience, extending over several years, with crucibles and dishes in numerous analytical laboratories has shown that equipment made of 10, 20 or 30% Rhodium-Platinum alloys have excellent shape stability, without being in any way inferior to normal crucible platinum as far as its chemical resistance is concerned, except the formation of a dark oxide film in oxidizing atmosphere. In case this oxide film causes analytical troubles its formation is prevented by cladding the interior of the equipment with Pt. By means of statistical data, the weight constancy of these Rh-Pt-alloys is compared with that of normal crucible platinum, after being used for normal analytical ignition and fusing tests, and after exposure to acids.
Notes:
In dem Bestreben, die mechanische Widerstandsfähigkeit und Formbeständigkeit von Laboratoriumsgeräten aus Platin zu verbessern unter voller Erhaltung ihrer chemischen Beständigkeit, wurden dem Platin 5-30% Rhodium zulegiert. Diese Legierungen besitzen im geglühten Zustand nicht nur bei Raumtemperatur, sondern auch noch bei 1000° C eine wesentlich höhere Festigkeit als normales Geräteplatin. Während mehrjähriger Erprobung von Tiegeln und Schalen in zahlreichen analytischen Laboratorien hat sich erwiesen, daß Geräte aus Pt-Legierungen mit 10, 20 oder 30% Rh eine ausgezeichnete Formbeständigkeit haben und dabei hinsichtlich ihrer chemischen Beständigkeit dem normalen Geräteplatin nicht nachstehen, abgesehen von der Bildung eines dunklen Oxydfilms in oxydierender Atmosphäre. Falls der Oxydfilm den Analysengang stört, kann seine Entstehung dadurch verhindert werden, daß Geräte eingesetzt werden, deren Innenwand mit Pt plattiert ist. Es wurden vergleichende Daten fü die Gewichtskonstanz von Geräten aus normalem Geräteplatin und aus diesen Pt-Rh-Legierungen bei den üblichen analytischen Glüh- und Schmelzoperationen sowie bei der Einwirkung von Säuren mitgeteilt.
Additional Material:
4 Tab.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19630140706
Permalink