ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The influence of the surface treatment with Fe—C cost alloysThe corrosion of cast steel, malleable cast iron and ordinary cast iron is influenced by the surface of the cast, i. e. the skin, the surface treatment, etc. With the aid of long-time tests extending over 41,600 hours (1733 days), data were obtained from the materials referred to above, indicating the influence of the surface treatment, i. e. the influence of cleansing with quartz sand, hard shot, tumbling barrels, grinding, scrubbing, smoothing, and polishing. It is in this sequence that the corrosion loss was found to increase in the long-time test which was carried out in town water with defined properties.In order to carry out comparisons with steel, reference tests have also been carried out on steel 37, steel 50 and steel 70. The Comparability of the laboratory results with the results obtained from corrosion tests in natural surroundings was specially tested. As far as cast iron 22, malleable iron 40 and 38 and cast iron 50 are concerned, the results were roughly identical.
Notes:
Der Ablauf der Korrosion an Grauguß, Stahlguß und Temperguß wird von der Gußoberfläche, also der Gußhaut, der Putzbehandlung usw. beeinflußt. An Langzeitversuchen von 41 600 h - 1733 Tg. werden Messungen an obigen Werkstoffen festgelegt, die den Einfluß der Oberflächenbehandlung, also den Einfluß des Putzens mit Quarzsand, Hartschrot, mit Putztrommeln, Schleifen, Schrubben, Schlichten und Polieren ermitteln. In dieser Reihenfolge steigt der Korrosionsverlust im Langzeitversuch, der in einem Leitungswasser bestimmter Eigenschaften angesetzt wurde, stark an.Um Vergleiche mit Stahl durchzuführen, sind die Werkstoffsorten StGS = Stahlguß; GG = Gußeisen; GT = Temperguß; St = Stahl 37, St 50 und St 70 mitgeprüft worden. Eine Kontrolle, inwieweit die Labor-Ergebnisse sich mit Ergebnissen der Natur-Korrosions- Versuche vergleichen lassen. wurde durchgeführt. An den Werkstoffen GG 22, GTW 40, GTS 38 und GS 50 sind ungefähr die gleichen Erkenntnisse ermittelt worden.
Additional Material:
4 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19620130802
Permalink