ISSN:
0272-8397
Schlagwort(e):
Chemistry
;
Chemical Engineering
Quelle:
Wiley InterScience Backfile Collection 1832-2000
Thema:
Maschinenbau
Notizen:
A family of casting composites, epoxy resins with mineral fillers, having a range of electrical properties, are being developed. In such composites, the dielectric constant is controlled primarily by varying the filler material in composition and proportions. The present work reports on the mechanical properties of composites made with two types of filler, an alumina powder (XA3500 from ALCOA) and a BaTiO3/TiO2 ceramic powder (ATD-50 from Ampex). Dependence of mechanical properties on curing agents was also determined. Filler contents from 0 to 40 percent volume were used. Epoxy systems contained single epoxy resin with both amine and anhydride hardeners. Processing of the anhydride-cured systems was easier than that of the amine-based systems because of their lower viscosity and longer gel time of the former. However, the anhydride-cured systems required higher processing temperatures. Curing kinetics and molecular bonding were investigated using a combination of differential scanning calorimetry, dynamic mechanical thermal analysis, and scanning electron microscopy. Activation energies of 11.2 kcal/mole and 12.1 kcal/mole were obtained for the curing of the amine-based and the anhydride-based composites respectively, and a small difference in the glass transition temperature was also observed. These effects can be attributed to the difference in the structure of the curing agents. The epoxy resin cured with NMA is less ductile compared with those cured with MTHPA or MHHPA due to slight chemical modification on the ring structures. This dependence of ductility on curing agent was observed in specimens with different filler contents. Although the presence of the filler materials was found to enhance the mechanical properties of the epoxy, the fracture mode in these materials is still brittle.
Zusätzliches Material:
11 Ill.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1002/pc.750100402
Permalink
